Instructions for use
Installing hardware driver and application
1. Plug your USB Receiver into your computer and wait for the automatic hardware installation to finish.
2. Insert the Installation CD into your optical drive and the EasiScope 2 Installer should launch automatically.
3. When the EasiScope 2 InstallShield Wizard appears, Click Next.
4. Wait for installation to be completed and then click “Finish” to close the InstallShield Wizard.
5. Launch the EasiScope 2 application.
6. Switch ON your EasiScope 2 by pressing the Power/Pairing button briefly.
7. Press and Hold the Power/Pairing Button on your EasiScope 2 for 7 seconds until the Status Indicator flashes rapidly, which indicates that your EasiScope 2 has entered Pairing Mode.
8. Press and Hold the Pairing Button on the USB Receiver for 3 seconds until the Channel Indicator LED flashes rapidly, which indicates that your USB Receiver has entered Pairing Mode.
9. Once the pairing process completes you will see an image in your EasiScope 2 application.
Using your EasiScope 2 with the EasiScope 2 application
1. Plug in your EasiScope 2 USB Receiver to your computer.
2. Switch ON your EasiScope 2 by pressing the Power/Pairing button briefly.
3. Launch the application.
4. Place the device over the item you wish to inspect and move the focusing dial to focus.
5. Press the Snap button to take a picture. Use File à Save as commands to save it on your computer.
6. Click the Captureà Start Capture on the application to take a video.
|
